HomeMatchup
21 sections · Skylights

Skylights, daylight without the worry

It usually starts with a rectangle of ceiling you keep checking after rain. The hard part is not the work - it is that every skylight company sounds equally sure of itself, and you get one guess. We check licence and insurance before we introduce anyone, and we record the date we checked.

Free · No spam

See who is actually qualified near you

About 60 seconds · No account · Only your matched pros get your details

  • 23Sections published
  • 974Pages planned
  • FreeCost to homeowners
  • $0Cost to homeowners

Skylights in short

Skylight work falls into four jobs: installing a new skylight (cutting a fresh opening in the roof and framing it), replacing an existing one in the same opening, reflashing a skylight that leaks but is otherwise sound, and repairing hardware like motors, blinds or seals. Replacement in an existing opening is the cheapest and fastest of the big jobs - VELUX puts a typical single skylight replacement at around two hours of work, plus any interior finishing. Cutting a new opening costs more because it involves framing, drywall and paint as well as roofing.

Fixr puts the national average skylight installation at about $1,523, with most projects landing between $1,080 and $1,966 and the full range running from roughly $647 to $13,582 for large or complex jobs. Material cost alone is around $229-$417 for a tubular unit, $295-$537 for a fixed skylight and $574-$1,044 for a ventilating one. The gap between the average and the high end is almost never the skylight itself - it's cutting and framing a new opening, electrical work, and finishing the interior shaft.

What we promise, and what we do not

How a pro gets in front of you

Most sites sell your number to whoever pays the most for it. We do not - your details reach only the skylight companies matched to your job. We are building licence and insurance checks on top of that, and we will publish each one with the date it was performed rather than claim it in advance.

A few pros, never a list

Your details go to the small number of local companies matched to your job, and to nobody else. They are not sold on.

No paid placement

A company cannot buy a better position in a match or in our rankings. Where we rank, the method is published so you can re-score it yourself.

Check the licence yourself

Ask for the number and look it up on your state board’s public register. We are building this into the match; it is not running yet.

Ask the insurer, not the contractor

Get liability and workers’ compensation certificates sent to you by the insurance agency direct. A forwarded PDF proves nothing about today.

What we check, and what we do not check yet

No verified skylights price ranges published yet.
We don’t publish a cost until we can show the data behind it. If you need a number today, the quote form gives you real prices from local companies.

Honest comparison

HomeMatchup vs. a lead site vs. doing it yourself

Three ways to get this work done. Here’s what each one actually gives you.

Getting skylights work done - three routes compared
HomeMatchup Typical lead site DIY
How many companies call youA short, named shortlist you agreed toOften 4-5+ at once, sold to whoever buys the leadNone - the work is on you
Licence & insuranceSelf-reported today - we tell you how to check it and are building the check inUsually self-reported by the contractorYour own permits and liability
What it costs youFree - pros pay us, and only for a real matchFree, but your number is resoldMaterials plus your time
Price guidance before you talkPublished ranges with the data behind themRarely shown before you hand over detailsYou research it yourself
If it goes wrongA named company, and a record of who received your jobHard to trace which site sold the leadNo recourse

Describes how HomeMatchup operates and the common lead-generation model. Not a claim about any named competitor.

Homeowners

What people say after they’ve hired

Zero reviews. On purpose.

We’d rather show you nothing than show you someone else’s reviews.

Plenty of sites fill this space with reviews scraped from elsewhere, or written for them. We don’t. The first skylights review on this page will come from a homeowner we matched, after their work was finished and paid for.

  • Only from homeowners we actually matched
  • Only after the job is complete
  • Published unedited, including the bad ones
  1. 1You get matchedA few checked pros, free
  2. 2Work gets doneCheck their licence and insurance first
  3. 3We ask youOnce, after completion
  4. 4It appears hereExactly as you wrote it
FAQ

Skylights questions, answered

The questions homeowners ask us most about skylights.

Fixr's national average is about $1,523, with most projects between $1,080 and $1,966. Simple replacements can land near $647; complex multi-unit jobs can reach five figures. Material alone runs roughly $229-$417 tubular, $295-$537 fixed, and $574-$1,044 ventilating. Framing, interior finishing and roof repair around the opening are often extra. See our skylight cost guide.
No. Properly flashed skylights routinely go decades without leaking. Most leaks trace to installation and flashing errors - missing or misaligned step flashing - rather than a defective unit. A leak blamed on the glass often gets sold as a full replacement when reflashing would fix it. Condensation on cold glass also looks like a leak and has a completely different fix.
VELUX describes many of its skylights lasting 20 years or more and recommends a professional inspection around the 30-year mark. Persistent between-pane fogging, cracks, yellow staining, and dripping at the sides are replacement signals. Installation quality and debris damming above the flashing move the outcome more than brand badge alone.
Yes. Fixr puts tubular skylight material at roughly $229-$417 versus $295-$537 for a fixed skylight and $574-$1,044 for a ventilating unit. A tube typically does not need a full interior light shaft, which cuts framing and drywall cost. Light delivery is more focused, so it is a different product, not just a cheaper skylight.
You are buying a mechanism plus a window. Fixr's material range for a ventilating unit is roughly double a fixed unit. Motorized or solar-operated versions can add electrical work at about $435-$793. If the room mainly needs daylight, a fixed unit with good glazing often solves the problem for less.
See all 1 skylights question

The wrong skylight hire costs more than the right one.

A skylight is a hole cut in a working roof. It is not a glazing job - the flashing detail is the whole thing. Getting matched takes about a minute, costs nothing, and you can walk away from every quote you receive.

Get my free skylights quotes (866) 582-8523

Free · No obligation · Only your matched pros get your details

Who wrote and checked this

Written by

The HomeMatchup Content Team

Editorial
Reviewed by

Michael Thompson

Senior Home Improvement Reviewer · 20 years

Senior technical reviewer.

Team-written. Second-person reviewed. Sources dated. Report a correction.

(866) 582-8523 Get free quotes