How this calculator works
No black box - this is the arithmetic the tool runs, written out.
low = area × price_low high = area × price_high
- area
- Your roof surface area in square feet - the sloped surface, not the floor plan below it.
- price_low / price_high
- The installed price-per-square-foot range for the material you picked. "Installed" means material plus labor, not material alone.
This is a rate calculation: a per-square-foot installed price multiplied by how much roof you have. The output is a range, not a single number, because the same roof genuinely does cost different amounts depending on who installs it and what they find when the old roof comes off.
The width of that range is information. If the low and high are far apart, the material is one where installer skill and job complexity swing the price a lot - get more quotes.
What it looks like with real numbers
Starting from
- Roof area
- 2,400 sq ft
- Material
- Cedar shakes (split), $8-$16 per sq ft installed
The working
Low end: 2,400 × $8 = $19,200High end: 2,400 × $16 = $38,400
$19,200 - $38,400
Reading it: Shakes are split and rugged; shingles are sawn and smooth, and price a little lower. Fire-treated cedar sits above both, and in some jurisdictions it is not optional.
How the calculation runs
Four operations, in this order. Nothing is hidden behind a button.
- Read your roof area in square feet.
- Look up the installed price-per-square-foot range for the material you selected.
- Multiply area by the low rate, then by the high rate.
- Return both as a range, because one number would imply a precision the method does not have.
Every option on this calculator, side by side
The same 2,400 sq ft roof priced against each choice in the wood type dropdown - so you can compare without changing the selector four times and trying to remember the answers.
| Wood type | Installed rate | 2,400 sq ft | Spread |
|---|---|---|---|
| Cedar shingles (sawn, smooth) | $7 - $13 | $16,800 - $31,200 | 86% |
| Cedar shakes (split, rugged) | $8 - $16 | $19,200 - $38,400 | 100% |
| Fire-treated cedar | $10 - $18 | $24,000 - $43,200 | 80% |
The spread column is how much the high rate exceeds the low one. A wide spread means installer skill and job complexity swing that option's price a lot - get more quotes on it.
Typical results by size
Cedar shingles (sawn, smooth) at the rate this page uses, across the sizes most jobs fall into. Find the row nearest yours to sanity-check a quote in seconds.
| Size | sq ft | Estimated range |
|---|---|---|
| Small (≈1,200 sq ft roof)Bungalow, small ranch, or a large detached garage. | 1,200 | $8,400 - $15,600 |
| Average (≈1,800 sq ft roof)Typical three-bed single-storey with modest overhangs. | 1,800 | $12,600 - $23,400 |
| Common (≈2,400 sq ft roof)The size most quotes in this range are built around. | 2,400 | $16,800 - $31,200 |
| Large (≈3,200 sq ft roof)Two-storey with a garage, or a spread-out single-storey. | 3,200 | $22,400 - $41,600 |
Roof pitch multipliers
A sloped roof has more surface than the ground it covers. This is the multiplier for every common pitch, applied to a 2,000 sq ft footprint - and it is the step most DIY estimates skip.
| Pitch | Factor | Roof area | Extra vs footprint | Access |
|---|---|---|---|---|
| 3/12 (low slope) | 1.031 | 2,062 sq ft | +3% | Usually walkable |
| 4/12 | 1.054 | 2,108 sq ft | +5% | Usually walkable |
| 5/12 | 1.083 | 2,166 sq ft | +8% | Usually walkable |
| 6/12 (common) | 1.118 | 2,236 sq ft | +12% | Usually walkable |
| 7/12 | 1.158 | 2,316 sq ft | +16% | Staging likely |
| 8/12 (steep) | 1.202 | 2,404 sq ft | +20% | Staging likely |
| 9/12 | 1.25 | 2,500 sq ft | +25% | Staging likely |
| 10/12 (steep) | 1.302 | 2,604 sq ft | +30% | Staging likely |
| 12/12 (very steep) | 1.414 | 2,828 sq ft | +41% | Staging likely |
Steeper costs more twice over: there is literally more roof, and the crew works slower on it. That is why a 12/12 roof is not 41% more expensive than a flat footprint - it is more.
How much region changes the number
Labour rates and disposal fees are local. Across the US the same asphalt roof swings about 71% from the cheapest state (Mississippi) to the priciest (Hawaii). A sample, on a 2,400 sq ft roof.
| State | Installed rate | 2,400 sq ft |
|---|---|---|
| Mississippi | $3.7 - $7.4 | $8,880 - $17,760 |
| Arkansas | $3.7 - $7.5 | $8,880 - $18,000 |
| Alabama | $3.8 - $7.7 | $9,120 - $18,480 |
| Oklahoma | $3.8 - $7.7 | $9,120 - $18,480 |
| Kentucky | $3.9 - $7.8 | $9,360 - $18,720 |
| Michigan | $4.3 - $8.5 | $10,320 - $20,400 |
| Montana | $4.3 - $8.5 | $10,320 - $20,400 |
| North Dakota | $4.3 - $8.5 | $10,320 - $20,400 |
| Utah | $4.3 - $8.5 | $10,320 - $20,400 |
| Wyoming | $4.3 - $8.5 | $10,320 - $20,400 |
| Massachusetts | $5.5 - $11 | $13,200 - $26,400 |
| California | $5.6 - $11.3 | $13,440 - $27,120 |
| New York | $5.6 - $11.3 | $13,440 - $27,120 |
| Alaska | $5.9 - $11.7 | $14,160 - $28,080 |
| Hawaii | $6.3 - $12.6 | $15,120 - $30,240 |
State averages still hide a lot - a major metro and a rural county in the same state are different labour markets. Run your own with the roof cost by state calculator.
Getting your inputs right
The answer is only as good as what goes in. This is where estimates usually go wrong.
Check your local fire requirements first
Some jurisdictions restrict untreated wood roofing or require a fire-rated assembly outright, and some insurers price it. This can decide the material for you before cost enters the conversation.
Look at how the deck below is ventilated
Cedar has to dry from both faces. Over an unventilated deck it fails early, which is why batten or mesh layers are common beneath it - and they are part of the cost.
Convert footprint to roof area
Measure length × width at the eaves, then multiply by your pitch factor - a sloped roof has more surface than the ground it covers. The area calculator does both steps.
What changes your number
A calculator applies an average. These are the things that decide where in the range you actually land.
- Fire requirements where you live Some jurisdictions restrict untreated wood roofing or require a fire-rated assembly outright. Check before you fall in love with the look - this can decide the material for you.
- Ventilation beneath Wood needs to dry from both faces. Cedar over an unventilated deck fails early, which is why batten or mesh layers are common under it.
- Maintenance appetite Cedar is the highest-upkeep common roof covering - cleaning, moss control, and replacing individual pieces. Its service life is strongly tied to whether that happens.
- Pitch and access Steep roofs need staging and fall protection and simply go slower. A roof a crew cannot walk costs meaningfully more than the same area at a walkable slope.
- Roofline complexity Every valley, dormer, chimney, and skylight is cutting, flashing, and waste. Two roofs of identical area can differ substantially if one is a plain gable and the other is cut up.
Common mistakes
Every one of these is something people genuinely do, and most of them cost real money.
- Treating cedar as fit-and-forget Of the common roof coverings this is the one where owner maintenance most changes the outcome. Neglected cedar in a damp, shaded spot ages fast.
- Pressure washing it High pressure strips the soft grain and drives water into the wood. Cedar gets cleaned gently or not at all.
Cedar shakes vs. shingles
Shingles are sawn smooth for a tailored look; shakes are split for a thicker, rugged texture. Cedar lasts about 30 years with upkeep - periodic cleaning and treatment. In wildfire zones, many codes require fire-treated wood or ban it entirely, so check locally first.
Cost ranges reflect 2026 U.S. installed prices (BLS producer/labor data, Remodeling Cost vs. Value, and manufacturer pricing). Your real price depends on your roof, region, and pro - see the full cost guide.
Where this stops being accurate
A rate model cannot see your roof. It does not know your pitch, how many layers have to come off, whether the decking underneath is rotten, or how many chimneys and valleys the crew has to cut around. Those factors routinely move a real quote 20-40% off a rate estimate in either direction.
This is a free estimating tool, not a quote. When you want a number somebody will stand behind, get matched with local pros - they measure the roof before they price it.
The terms on your quote, explained
A roofing quote is written in trade vocabulary. These are the words that actually change what you are paying for.
- Square
- 100 square feet of roof surface. The unit the entire trade orders, prices, and quotes in - a 2,400 sq ft roof is 24 squares.
- Pitch
- The slope, written as rise over a 12-inch run. A roof climbing 6 inches per 12 horizontal inches is "6/12".
- Decking (sheathing)
- The structural panels over the rafters that everything else fastens to. Its condition is unknown until the old covering is off.
- Underlayment
- The water-resistant layer between decking and covering. Synthetic or felt; it is the roof's second line of defense.
- Flashing
- Metal that seals the joins - around chimneys, walls, valleys and vents. Most roof leaks are flashing failures, not covering failures.
- Drip edge
- Metal at the roof edge that directs water into the gutter instead of behind it. Usually a code requirement.
- Valley
- Where two roof planes meet and channel water. High-volume, cut-heavy, and a common leak point.
- Ridge vent
- Exhaust ventilation along the ridge. Only works if matched by intake at the soffits.
- Tear-off
- Removing the existing covering. One layer is priced into most quotes; a second or third is extra labor and disposal.
- Low slope
- Roughly 3/12 and below, where standard shingle rules stop applying and membrane systems or special underlayment come in.
Cedar Shake Roof Cost Calculator questions
Want a real number? Get matched with a local pro →
